Portable Appliance Testing Commonly Known As PAT Testing.
Portable Appliance Testing commonly know as (PAT) testing is surrounded by lots of myths. Here you can find out about the common myths around PAT testing and also find out about the key facts around the inspection and testing of portable electrical equipment.
Portable appliance testing (PAT) testing is a term used to describe the examination of electrical appliances and equipment to ensure they are safe to use. Most electrical safety defects can be found by visual examination but some types of defect can only be found by testing.
However, it is essential to understand that visual examination is an essential part of the process because some types of electrical safety defect can’t be detected by testing alone.
The use of a relatively simple brief users checklist, can be a very useful part of any electrical maintenance regime. This is where the user is given some simple training to complete the brief checklist. However, more formal visual inspection and testing by a competent person may also be required at appropriate intervals, depending upon the type of equipment and the environment in which it is used.
I’ve been told that, by law, I must carry out PAT testing every year on my portable appliances. Is this correct?
The Electricity at Work Regulations 1989 require that any electrical equipment that has the potential to cause injury is maintained in a safe condition. However, the Regulations do not specify what needs to be done, by whom or how frequently. in other words they don’t make inspection or testing of electrical appliances a legal requirement, nor do they make it a legal requirement to undertake this annually.
How frequently do I need to carry out PAT testing on my electrical portable appliances?
The frequency of PAT testing depends upon the type of equipment and the environment it is used in. For example, a power tool used on a construction site should be examined more frequently than a lamp in a hotel bedroom. To obtain the HSE guidelines on PAT testing click here. This will open up a new window.
Do I need to keep records of PAT testing and should I label any appliances tested?
There is no legal requirement to label equipment that has been inspected or tested, nor is there a requirement to keep records of these activities. However, having a record and / or labeling can be a useful management tool for monitoring and reviewing the effectiveness of the maintenance scheme – and to demonstrate that a scheme exists.
Do I need to PAT test new equipment?
New equipment should be supplied in a safe condition and not require a formal portable appliance inspection or test. However, a simple visual check is recommended to verify the item is not damaged.
I have been told that I have to get an electrician to carry out my PAT testing work. Is that correct?
The person doing the PAT testing work needs to competent to do it. In many low-risk environments, a sensible (competent) member of staff can undertake visual inspections if they have enough knowledge and training. However, when undertaking combined inspection and testing, a greater level of knowledge and experience is needed, and the person will need.
- The right equipment to do the tests.
- The ability to use this test equipment properly.
- The ability to properly understand the test results.
Where can I get more information about maintaining portable appliances used in different environments?
Information is also available in: Work using electrically powered equipment.
I run a tool hire business? What PAT testing do I need to do and are there additional responsibilities for the person hiring my tools?
It is strongly recommended that equipment suppliers formally inspect and test the equipment before each hire in order to ensure it is safe to use. The person hiring the equipment should also take appropriate steps to ensure it remains safe to use throughout the hire period. The question ‘What is portable appliance / PAT testing?’ above gives guidance on what this will entail.
Are there are any case studies about PAT Testing?
A high street travel agent’s approach to PAT testing thought about what it needed to do to maintain its portable electrical equipment. As their work generally included office work and dealing with customers the manager considered that the health and safety risks would be generally low. The portable electrical equipment was used in a clean and dry shop by a small number of employees. In deciding what action was needed:
- The manager thought about the type of portable equipment that was used in their shop and the level of risk that it might create.
- She looked for electrical equipment in the shop and found that there were a number of computers, a fax, two printers and a vacuum cleaner.
- She then thought about the likelihood that the items could become damaged.The manager kept a note of the checks in her diary to remind herself to re-inspect the equipment.
- Computers, printers and faxes were not moved around much and were positioned so that the cables could not become trapped, and therefore the probability that items might be damaged was extremely low. The manager decided that they would be maintained by a visual inspection every 5 years.
- The vacuum cleaner was heavily used. The manager remembered that the cable was repaired 6 months ago by an electrician as it had been pulled out of the cable grip. She knew that in future it would need to be looked at more often. It was decided that the vacuum should have a visual inspection every 6 months and that employees would be encouraged to look for signs of damage to the plug and cable before plugging it in.
- Only the vacuum cleaner was thought to present a high risk, so the manager decided to get this tested after twelve months and review this after 24 months.
- None of the remaining equipment in use was thought to present a high risk, so the manager decided that a full PAT testing was not needed for these items.
- Portable electrical equipment must be maintained to prevent danger.
- For most portable electrical equipment in a low-risk workplace, a portable appliance test is not needed.
- Working out what you have to do is not time consuming or complicated.
- Simply looking for signs of damage is a good way of maintaining portable electric equipment.
HSE’s approach to maintaining portable appliances in its own offices.
In 2011, the HSE reviewed its approach to portable appliance maintenance in its own offices. Thinking about the type of equipment in use, and how it was used, the HSE looked back at the results from its annual testing of portable appliances across its estate over the last five years. Using the results of the previous tests, the HSE decided that further PAT testing was not needed within the foreseeable future or at all for certain types of portable equipment. The outcome was that they decided to continue to monitor any faults reported as a result of user checks, visual inspections and review its maintenance system if evidence suggests that it needs revising. Electrical equipment will continue to be maintained by a series of user checks and visual inspections by staff that have had some training.
- Annual PAT testing is not always necessary in low risk environments.
- You do not need to be an electrician to carry out visual inspections.
- Low cost user checks and visual inspections are a good method of maintaining portable electric equipment.
Is PAT Testing compulsory?
No. The law simply requires an employer to ensure that their electrical equipment is maintained in order to prevent danger. It does not say how this should be done or how often. Employers should take a risk-based approach, considering the type of equipment and what it is being used for. If it is used regularly and moved a lot e.g. a floor cleaner or a kettle, testing along with visual checks can be an important part of an effective maintenance regime. This is giving employers confidence that they are doing what is necessary to help them meet their legal duties. HSE provides guidance on how to maintain equipment including the use of PAT testing.
Subscribe to HSE’s electrical safety eBulletin – includes email notifications when this page is updated